Our Products & Services

C & P SEALS Mechanical Seal Range Seal Repair and Manufacturing

We can refurbish and re-design mechanical seals

Should the condition of the mechanical seal allow, we can offer a complete refurbishment service-replacing only those components that will return the seal to fully functional.

Contact us  with your requirements. To assist with urgent repairs of the mechanical seal or component, we manufacture the following; Carbons, Bronze, Stainless Steel and PTFE. Harder faced materials are also available i.e. Silicon Carbide and Tungsten carbide .


C & P SEALS offer a broad range of mechanical seals. Mechanical seals are used in pumps and rotating equipment to prevent liquids and gases from escaping into the environment. Our website illustrates a small selection of what is available- Please contact us to discuss your requirements


Expansion Joints
Our expansion joints are made entirely of non-asbestos materials. Their composite construction provides durability with increased flex fatigue life over comparable systems, and avoids insulation loss due to shake-down or compaction.

If required, our experienced site staff can supervise or install the joints for you.
GT Exhaust Expansion Joints

C & P SEALS range of gas turbine exhaust joints and the adjacent steel parts offer unique solutions to problems such as high temperatures, large movements, pulsations, vibrations and water washing.
Full Product Range
Multilayered Fabric Wraps

Whatever your industry - power, cement, petrochemical, steel or any other process involve high temperatures.
PTFE Expansion Joints

C & P SEALS  range of products encompasses the very latest in technological advances.

Elastomeric Expansion Joints

These expansion joints can be used in most industries.We can offer moulded or stitched in a wide range of materials

GT Inlet Expansion Joints

C & P SEALS  GT Inlet Joints provide you with top quality and long life plus reduced  installation time.
HT/XA Expansion Joints

 HT/XA Bellows and related products are extremely rugged and maintain good flexibility throughout their temperature range.

C & P SEALS rubber expansion joints are flexible connectors made from natural or synthetic elastomers in which special fabrics are embedded to provide physical reinforcement. Rubber expansion joints provide a proven and flexible solution to accommodate many types of movements and requirements of industrial plant and equipment.

These include:
  • Accommodating pressure loads
  • Neutralising axial, lateral, angular, and torsional stresses
  • Reducing noise: Isolating sources of vibration
  • Compensating for misalignment at plant start up, and Prolonging the life of motive equipment

C & P SEALS and SUPPLIES. Same Day Cutting Service Available

We have the capability to produce the full range of standard soft cut, metallic and semi-metallic gaskets including DIN, ANSI and BST range in Full Faced or IBC.

A comprehensive range of materials are available to us including those from the top manufacturers such as Klinger, Novus, Flexitallic, Garlock, Gore and James Walker. Which includes….
  • Non-Asbestos Fibre
  • Composite Gaskets
  • Metallic / Semi-Metallic
  • Reinforced Graphite
  • Homogenous Graphite
  • PTFE
  • Natural/Synthetic Rubbers
  • Cork
  • Textiles
  • Felt
We can offer a complete design, material specification and cutting service on all bespoke gaskets, Gaskets can be manufactured by using samples or drawings.

Site visits by our technical sales personnel are always encouraged to ensure total understanding of the requirement and accuracy of dimensional and specification details for the particular job.

The 24 hour call-out service provides peace of mind for our customers who may require our products in shut-down or break-down situations.

Our principles of intensive customer support, service, reliability and technical awareness provide a safe, consistently professional and competitive environment for all our customers.

Our Products

Machined Plastics

Using molded or extruded basic shapes, such as rod and tube and block, a range of PTFE machined parts are produced to close tolerances with high quality surface finishes.

A wide range of various plastics and Virgin and Loaded PTFE materials are available.

Moulded Parts

All of our products are the result of our customer's exact requirements.

Whether it is a compression or injection moulding you require, we are happy to quote.

C & P SEALS and SUPPLIES can manufacture all kinds of rubber moulded product lines in a wide variety of high specification or commercial materials.

Rubber Moulding

  • Moulded Bellows
  • Moulded Rubber Seals
  • Moulded Diaphragms
  • Moulded Covers

Rubber to Metal Bonding

C & P SEALS are able to offer complex profile steel to natural rubber bonding.

We  have the experience to produce ,from small quantities to mass production.Typical examples as follows;

  • Metallastik Plates and bushes
  • Anti vibration mounts
  • Rail Parts
  • Bonded tyres to wheels.
  • Steam Engine Parts

Multi Seal Gasket

The sealing of glass lined pipes and vessels requires a certain type of sealing solution. Multiseal PTFE envelope gaskets satisfies this need.

Our gaskets operate within the temperatures encountered within glass lined vessels of 60 degrees to +230C degrees. The Multiseal insert material is produced on a unique manufacturing process, which gives it excellent compression and recovery properties, this when used in conjunction with a corrugated steel ring and PTFE envelope, provide a gasket solution that will seal at a minimum load of 8 N/mm2, but will also allow a maximum load of 20 N/mm2 if required. This is within the recommended loads allowable for glass lined equipment.

Different Gasket Styles

We can produce complex shapes or simple gaskets upto 1,5mtrs diameter in one piece-or upto 6mtrs with dovetailed and bonded joints.  All materials available in these forms

Exhaust Gaskets

We manufacture a wide range of exhaust gaskets in various materials suitable for many applications including for use with high temperature catalytic converters. These include gaskets in the form of olives, flat, laminated, composite and shim type constructions.


Washers are manufactured in different shapes, sizes, folded or flat from numerous materials including copper, brass, stainless steel, steel etc. These are used for many different sealing applications. A large range are held in stock but can be produced to your requirements.

Non-Asbestos Fibre

Compressed sheet fibre jointing is designed for a wide range of industrial and original equipment applications where sealing performance and specification are essential.  Based on high performance, reinforcing fibres blended with elastomeric binders and inorganic fillers, the non-asbestos materials offer outstanding performance in a range of industrial applications.

Compressed sheet jointing is used in many industrial applications including chemical processing, aerospace, automotive, power generation and water.   A wide variety of these components can be formulated using this process and subsequently materials can be designed to function over an extensive range of fluids, pressures and temperatures.

The suitability of compressed fibre sheet grade in a given application is dependent on a number of factors including chemical resistance, temperature and pressure capability.  To assist our customers to make informed choices as to the suitability of a product for a particular application, these materials are subject to a wide range of tests as specified by the statutory regulations and customer requirements.

Mechanical Seals

C & P SEALS and SUPPLIES Ltd supply new seals of all description from single spring to flushed cartridge seals-We can offer compatible seals to your original equipment seals .We also offer a full refurbishment service (see products for further information or please contact us to discuss)

Expansion Joints

C & P SEALS and SUPPLIES offer all types of expansion joint, from stitched gaitors, to metal ended moulded rubber, through to multi-layered Gas Turbine Joints (see products for further information or please contact us to discuss)

Metal Machining Service

Because of our strong links with tool making and machining, C & P SEALS and SUPPLIES can offer a very competitive machining service in all grades of material. We can offer quick turnaround on 1offs to 1000 offs and would welcome your enquiries

© Copyright 2021 CP Seals Supplies LtdWeb Design by Toolkit Websites